Tel:+8613256727251      E-mail: manager@jnhanten.com

Hanten CNC, Hanten Laser and Hanten UV.P are the three registered trademarks of Jinan Hanteng Laser Technology Co., Ltd.

The UV Printer Nozzle Heating Does Not Heat Up, There Are Problems in These 4 Places
You are here: Home » Applications » UV Printer Project » The UV Printer Nozzle Heating Does Not Heat Up, There Are Problems in These 4 Places

The UV Printer Nozzle Heating Does Not Heat Up, There Are Problems in These 4 Places

Views: 0     Author: HanTenCNC     Publish Time: 2021-12-12      Origin: Site

uv printer a3

The heating of the nozzle of the uv printer will directly affect the normal ink output of the uv ink, which will cause the ink to be cut off during the printing process. Especially when the temperature is low in winter, the smoothness of uv ink is far less than that in summer. At this time, not only the nozzle and uv ink need to be heated, but the working environment also needs a suitable temperature. The temperature needs to be between 20°C and 30°C. Generally, the problem that the nozzle does not heat up is easy to solve, let's take a look.


1. uv printer reset

In the case that the uv printer is not reset, you only need to reset the machine and turn it on again, and the heating plate will heat up.


2. The uv printer heating film is aging

The aging of the heating film is a normal phenomenon. As the heating film of the uv flatbed printer has been used for a long time, it will generally be aging after 6 months. Just replace it with a new heating film.


3. The voltage of the heating power supply box is too low

Open the cover of the power box of the uv flatbed printer and check the voltage value to see if it is too low. If it is too low, check whether the voltage stabilizer is normal.


4. Poor heating contact

Check whether the contact between the heating plate and the nozzle circuit is loose or broken, if any, reconnect it to return to normal.


Finally, the editor reminds all users that when the weather is cold in winter, before printing on the uv flatbed printer, the uv ink, nozzles and other key parts must be heated before printing.


QUICK LINKS

CONTACT US

   Add: NO.322, Shunfeng road, High tech zone, jinan city, shandong Province, China
   Fax: +86-531-88789173
   Phone: +8613256727251
   E-mail: manager@jnhanten.com
   Skype: +86-155 8995 7213
   WhatsApp: +8613256727251

Copyright  2021 Jinan Hanteng Laser Technology Co., Ltd.    Technical Support : sdzhidian